Professional automatic vacuum packaging machine manufacturer
Tel:+86-13353371368(Mr.Tan)
Video
Overview
Features
Process
Parameter
After years of research and development of BD-520, BD-420 and BD-320 modified atmosphere fresh-keeping packaging machines, our company has rewritten the history of relying on imported equipment for 20 years in China, completely replaced imports, and has obtained national patents.
Schematic:
1、Front end of equipment (bottom) (lower membrane holder) Before the equipment is operated, it is necessary to take a roll of the lower film and install it on the lower film frame, open the lower film, install the lower film on the roller between the chain clips, and manually move the switch to make the film slowly step to the forming area. Then stop jogging. |
2、Front end of equipment (upper) (forming area) It consists of a forming die and an upper heating die to form the lower film into a set shape. |
3、The middle of the equipment (discharging area)
The packaging material needs to be placed in the loading area. The automatic feeding device can be set up according to the regular materials to save labor as much as possible.
4、Middle of the device (sealing and vacuum area) From the sealing mold and the upper heating mold, the equipment reaches the sealing vacuum area by stepping, the lower film mold rises through the cylinder, presses the upper heating mold, and then vacuumizes through the vacuum pipeline, and finally completes the sealing. |
5、Equipment tail (die cutting part) The upper and lower dies are punched to form the edges and corners of the packaging are smooth without burrs |
6、Equipment tail (waste recycling rack) Scrap recycling after punching |
7、The upper end of the equipment (control panel and upper film frame) The whole machine is operated by PLC control panel to set specific parameters and stop running. |
Upper film holder: Take a roll of upper film and install it on the upper film holder, and put the upper film into the sealing area through the sliding rod.
Upper film width |
495(395)mm |
Lower film width |
523(423)mm |
Studio size |
400×(300-400)mm |
Air pressure/air consumption |
≥0.6MPa 0.3m3 |
degree of vacuum |
-0.10MPa |
power supply |
380V 50HZ |
total power approx. |
13kw |
Dimensions |
5800×1170(1070)×1700mm |
maximum stretch |
80mm |
Total Weight |
1800kg |
Note: Data are subject to change without notice
+86-13353371368(Mr. Tan)
+86-0577-65026568
+86-0577-65708680
1585978132@qq.com
No. 281 Wanxiang Road, Wanquan Town, Pingyang County, Wenzhou City, Zhejiang Province, Bedde machinery Factory two
Scan WeChat